fag snv150 bearing

Basic static load rating C0:1000 kN; Dw:15 mm; Housing washer:GS 81224; Ea:127 mm; Basic dynamic load rating C:255 kN; d:120 mm; Limiting speed:1600 r/min; Mass roller and cage thrust assembly:0.58 kg; Roller and cage thrust assembly:K 81224 TN; Reference speed:800 r/min;

Cap bolt recommended tightening torque:298.3 N·m; End plug (suffix Y):EPR 15; Ca:62.789 mm; R1:73.025 mm; Stabilizing ring:2 x 38151-26; P90°:107 kN; P180°:72.5 kN; Eye bolt:2 x 3/8-16 UNC; Da:200 mm; Housing:SAFS 026 KA;

Fillet Radius ra:2.50 mm; Basic Static Radial Load Rating Co:236000 N; D:240.0000 mm; Fillet Radius rb:1.00 mm; Oil Speed Rating n2:3500 rpm; B:50.00 mm; Grease Speed Rating n1:2700 rpm; Basic Dynamic Radial Load Rating C:229000 N; d:110.000 mm;

D:160.0000 mm; Accessories:Two Shields; Oil Speed Rating n2:3600 rpm; B:71.40 mm; Fillet Radius ra:2.00 mm; Basic Dynamic Radial Load Rating C:187000 N; Basic Static Radial Load Rating Co:208000 N; Sealed Speed Rating n3:2600 rpm; d:75.000 mm; Grease Speed Rating n1:2600 rpm;

Ca:276 mm; H2:135 mm; Mass housing:700 kg; Q120°:5800 kN; H1:420 mm; P150°:3100 kN; A1:420 mm; L:1220 mm; A:460 mm; N1:48 mm;

da min.:89.4 mm; Da min.:114.2 mm; r1 min.:1 mm; da max.:101.2 mm; Material constant KM:330; d1 ≈:101.219 mm; D:130.175 mm; Basic static load rating C0:1760 kN; Specific static load factor K0:300 N/mm²; b:9.3 mm;

B1:17 mm; d:120 mm; d1 ≈:187.6 mm; B2:30.5 mm; r3,4 min.:5 mm; Mass angle ring:2.58 kg;

ba min.:108 mm; Appropriate attachment bolt, size G:36 mm; s:13 mm; J1:160 mm; Eye bolt, size:2 x M 24; Locating ring:6 x FRB 10/420; P55°:4700 kN; Pa:1200 kN; Adapter sleeve:OH 3056 H; J6:720 mm;

d:20 mm; Tolerance housing:H7 m/s; Coefficient of friction µ max.:0.15; Permissible sliding velocity v min.:0 m/s; Tolerance shaft:f7 m/s; Mass bushing:0.017 kg; Coefficient of friction µ min.:0.08; B:20 mm; Specific dynamic load factor K:40 N/mm²; D:23 mm;

Comparative axial load rating CFa:296 kN; Calculation factor e:0.31; D:673.1 mm; Calculation factor Y0:2.2; Comparative radial load rating CF:1900 kN; d:501.65 mm; Calculation factor Y2:3.3; d1 ≈:538 mm; Calculation factor Y1:2.2; r1,2 min.:3.3 mm;

Cap bolt, SAE grade:8; R2:21.431 mm; Cap bolt recommended tightening torque:298.3 N·m; S:4.763 mm; h:35.719 mm; Cap bolt:2 x 5/8-11 UNC; N1:19.05 mm; J max.:279.4 mm; P90°:36 kN; P180°:23.1 kN;

Mass pillow block:213 kg; A1:203.2 mm; Initial grease fill:2154.6 g; Appropriate attachment bolt size G:1.25 in; J1:127 mm; PG:1/4 NPT; Cap bolt recommended tightening torque:271.2 N·m; H1:209.55 mm; Da:359.999 mm; Pa:60.9 kN;

Da:319.999 mm; Cap bolt, SAE grade:5; J max.:600.075 mm; J min.:530.225 mm; R2:41.275 mm; H:377.825 mm; End plug (suffix Y):EPR 17; Mass pillow block:146 kg; P180°:89 kN; Housing:SAF 630;

Initial grease fill:379.89 g; P120°:94.3 kN; N1:22.225 mm; Stabilizing ring:2 x 36053-50; Mass pillow block:60.3 kg; Cap bolt, SAE grade:8; P150°:87.2 kN; P180°:107 kN; Cap bolt recommended tightening torque:298.3 N·m; Da:210 mm;

d:100.000 mm; Fillet Radius ra:2.50 mm; Basic Static Radial Load Rating Co:380000 N; Fillet Radius rb:1.00 mm; Oil Speed Rating n2:2800 rpm; Grease Speed Rating n1:1900 rpm; Basic Dynamic Radial Load Rating C:307000 N; B:94.00 mm; D:215.0000 mm;